The Allen-Bradley 1336F-BRF100-AN-EN-HCS2 drive is a variable speed drive with an adjustable frequency that is used to control AC motor speed and torque levels by varying the motor input frequency and the voltage levels. It can be used with small appliances and large compressors. Allen-Bradley/Rockwell Automation is the manufacturer for this variable speed drive. The range of the input voltage varies from 380 Volts AC to 480 Volts AC. The output power rating for this AC drive is 10 Horsepower. An open enclosure with an IP00 rating is available for protection on this drive. This enclosure is not waterproof. The 1336F-BRF100-AN-EN-HCS2 comes with English as the default programming language from the manufacturer. The drive supports both uploading and downloading capabilities and it features the programmer controller with a digital pot.

Special precautions should be taken during the installation of the Allen-Bradley 1336F-BRF100-AN-EN-HCS2 drive. The electrostatic discharge produced by static electricity can damage the complementary metal oxide semiconductor device on the drive board. The drive has an advanced way of relaying different status and, fault conditions which are reported by using the operator interface or through the communication port. All the fault diagnostics start with a full load and the drive self-check diagnostics run each time the drive gets started. The 1336F-BRF100-AN-EN-HCS2 can only be operated within a relatively humid environment with 5 to 95% non-condensing humidity. The drive has an AC input overvoltage trip rating of 570 Volts AC and an AC input undervoltage trip rating of 275 Volts AC. The control logic noise immunity rating of the drive is for showering arc transients from 350 to 2000 Volts peak. The drive comes with different safety detection and trip features. The drive trips for unusual system events including undervoltage, overvoltage, drive overcurrent, overtemperature, ground fault, encoder loss, and load loss due to single-phase connection situations.