The 1336F-BRF150-AN-EN-GMS1 is an AC drive manufactured by Allen-Bradley/Rockwell Automation. The drive is easy to use and it delivers outstanding performance in an industrial setting. It is manufactured with a compact size and it can also be installed in a small space. The drive is used to regulate the torque performance of 3-phase motor devices. To regulate the motor’s performance, the AC drive uses a control algorithm. It comes with sensorless vector control which is an enhanced way to control motors. It provides high torque levels over a wide range of speed. The 1336F-BRF150-AN-EN-GMS1 uses an input voltage rating of 480 Volts AC and it generates a total output power rating of 15 Horsepower with it. The drive has an open enclosure. The enclosure is certified with an IP00 rating. This enclosure is not water-resistant and special care should be taken during the handling of the drive to prevent damage. English is the main language for communication in this kind of drive. For communication, the drive uses a GM2 module which comes with a snap-in cradle option for installation.

The Allen-Bradley/Rockwell Automation 1336F-BRF150-AN-EN-GMS1 AC drive should be installed in a location where airflow through the armature-driven fans is adequate for cooling the drive. If there is a lack of sufficient airflow, the motors may overheat when the drive is operated for long hours at below 50% of the base speed. The motors also require balancing when the drive is operated with 125% of the base speed. For braking, the drive uses insulated gate bipolar transistors which are also a cost-effective means of braking. The 1336F-BRF150-AN-EN-GMS1 features 4 status indicators which are located on the control board of the device. These indicators are used to relay information about different events. Along with the indicators, the drive also features multiple sensors which can send alerts for unusual system events.