The Allen-Bradley 1336F-BRF20-AA-EN-HASP-L6 is an electrical motor drive with 2 Horsepower of output manufactured by Allen-Bradley. This device delivers the highest quality in motor speed, torque, and direction control. The 1336F-BRF20-AA-EN-HASP-L6 provides speed control for 3-phase AC motors such as those used in conveyors, pumps, fans, and shop tools. The main parts of this AC drive that belongs to the Allen-Bradley 1336 PLUS II series of drives are the power modulator, controlling unit, and sensing unit. The logic of the drive is programmed into a microprocessor which is a core feature of the controlling unit. This unit moves motors by calculating the output signal with the sensorless vector control. It also generates the commands needed to protect the power modulator and motor.

Besides using these base modules, the 1336F-BRF20-AA-EN-HASP-L6 is a drive that has a programmer-only HMI module and a 115 Volts AC rated control interface module. It is specially designed to provide a large range of torque, speed, and power setting options. The efficiency rating of the 1336F-BRF20-AA-EN-HASP-L6 is very high because very little thermal losses occur in it. The Allen-Bradley 1336F-BRF20-AA-EN-HASP-L6 can be dually supplied with 380 to 480 Volts AC or with 513 to 620 Volts DC voltage. The users can regulate the drive’s operation over the HMI display and buttons. The HMI is pre-installed but removable, and it offers digital programming for precise and accurate process regulation and maintenance. The setup and operation control processes are achieved easily by reading and following the instructions, so special training for the users is not required. The device must be stored in a dry place with temperatures lower than 40 degrees Celsius when it is not in use.