Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-BRF20-AE-EN-HAS2-L4

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-BRF20-AE-EN-HAS2-L4

|
Need a Specific Revision?

The 1336F-BRF20-AE-EN-HAS2-L4 by Allen Bradley is an adjustable-frequency AC inverter within the 1336 PLUS II Drives series, designed to operate at incoming voltages of 380-480 VAC (3-phase) or 513-620 V DC. This unit has a motor output capacity of 1.5 kW (2 HP) and provides a nominal output current of 3.8 A.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-BRF20-AE-EN-HAS2-L4

ManufacturerAllen Bradley
Product TypeAdjustable-frequency AC inverter
Product Line1336 PLUS II Drives
Part Number1336F-BRF20-AE-EN-HAS2-L4
Weight15.00 lbs (6.80 kg)
Frame ClassFrame B configuration within the 1336 PLUS II series
Incoming Supply Range380 – 480 VAC, 3-phase or 513 – 620 V DC
Motor Output Capacity1.5 kW (2 HP)
Nominal Output Current3.8 A
Housing RatingIP20 / NEMA Type 1 enclosure with built-in EMC filter
Torque ProfilesSupports both constant-torque and variable-torque modes
Control Signal TypeTTL-level contact-closure inputs (user-specified)
Carrier Frequency CapabilityUp to 4 kHz PWM carrier switching
Power Hold-Up15 ms ride-through at full load
Logic Supply Hold-UpMinimum 0.5 s (typical 2 s) logic ride-through
Operating Ambient Range0 °C to 40 °C for IP20/NEMA 1 versions
Storage Temperature Range-40 °C to 70 °C across all enclosure types
Maximum Service AltitudeUp to 1000 m (3300 ft) without derating
Request a Repair

The Allen Bradley 1336F-BRF20-AE-EN-HAS2-L4 is classified as an adjustable-frequency AC inverter under the 1336 PLUS II Drives series. Capable of handling incoming supply voltages ranging from 380 to 480 VAC in three-phase configurations or 513 to 620 V DC, this inverter is engineered to adapt to various operational needs. With a motor output capacity rated at 1.5 kW, equivalent to 2 HP, it can efficiently deliver a nominal output current of 3.8 A, making it suitable for a variety of applications.

This product is constructed in a Frame B configuration and is housed within an enclosure rated as IP20/NEMA Type 1. A notable feature of this drive is its built-in EMC filter, which safeguards the operation against electromagnetic interference. The 1336F-BRF20-AE-EN-HAS2-L4 supports both constant-torque and variable-torque operating modes, offering flexibility based on the specific requirements of the application.

Control is facilitated through TTL-level contact-closure inputs, allowing customization based on user specifications. The drive can operate with a PWM carrier frequency of up to 4 kHz, enhancing its responsiveness and performance. It is designed to maintain power hold-up for 15 ms under full load conditions and a typical logic supply hold-up ride-through of 0.5 s, with a typical performance of 2 s.

Operating in ambient temperatures from 0 °C to 40 °C, the IP20/NEMA 1 rated inverter is versatile for many environments. Furthermore, it can withstand storage temperatures spanning -40 °C to 70 °C across all enclosure types. Notably, the unit is suitable for service at altitudes of up to 1000 m (3300 ft) without requiring any derating, making it a reliable choice for various installation sites.