The Allen-Bradley 1336F-BRF200-AA-EN-GMS5-L6 drive is a microprocessor-based adjustable frequency drive. Part of the Allen-Bradley 1336 PLUS II series, the 1336F-BRF200-AA-EN-GMS5-L6 comes with the DeviceNet interface with a snap-in cradle. It is not recommended to mount the A4-frame 1336F-BRF200-AA-EN-GMS5-L6 drive on a combustible surface. However, if the situation dictates that the drive needs to be mounted on a combustible surface, then 6.35-millimeter spacers need to be placed under the drive. The weight of the IP20 NEMA enclosure of the drive is 35 pounds. The enclosure dimensions are 350 x 260.0 x 117.0 millimeters. Installing the drive in locations containing corrosive elements should be avoided.

The 1336F-BRF200-AA-EN-GMS5-L6 drive comes with variable torque and constant torque capabilities. For both modes, the output power rating is 20 Horsepower, the input current rating is 28 Amps, and the output current rating is 27 Amps. The drive is configured to trip at predefined thresholds that exceed the rated input voltage range which is from 380 to 480 Volts AC. The high input voltage threshold is 570 Volts AC, and the low input voltage threshold is 280 Volts AC. The rated nominal bus voltage is 648 Volts DC. The drive is also configured to trip at a high bus voltage threshold, which is 810 Volts DC and at the low bus voltage threshold which is 400 Volts DC. The drive control program monitors the heatsink temperature and it shuts down the drive if the high-temperature threshold is exceeded. The built-in HMI on the 1336F-BRF200-AA-EN-GMS5-L6 supports English as the programming language. Integrated control interfaces on the 1336F-BRF200-AA-EN-GMS5-L6 support 115 Volts AC voltage.