The Allen-Bradley 1336F-BRF200-AE-EN Plus II Adjustable Frequency AC Drive is part of the 1336 Plus II series, which is used for speed and torque control in a wide variety of industrial applications. The drive’s variable torque input is 23KVA at 28A and its output is 22KVA at 27A, with a drive rating of 15kW (20HP), at a 3-phase 380 to 480V AC or a 513 to 620V DC operating voltage. Its input voltage tolerance is -10% to +10%, at 47 to 63Hz, with a 0.95 operational displacement power factor, and it offers drive efficiency of 97.5%. The 1336F-BRF200-AE-EN has a Metal Oxide Varistor that provides voltage surge protection, and it is designed to provide phase-to-phase and phase-to-ground protection. The 1336F-BRF200-AE-EN provides as much as 6000V of line transient protection, and it can ride through a power interruption of 15 milliseconds without faltering.

The 1336F-BRF200-AE-EN features Sensorless Vector Control which provides exceptional torque speed even at a low motor speed of 15rpm, and it features the Standard Volt per Hertz motor control, and it employs the Sine-Coded Pulse Width Modulated control signal of 2 to 8 KHz programmable carrier frequency for output control. Its output voltage range is 0 to the rated motor voltage, with a programmable output frequency range between 0 and 400Hz, and it has digital and analog controls with control accuracies within ±0.01% and ±0.4% of the set output frequencies. It offers Class 10 motor protection using the i2t protection algorithm, and it provides users with 2 programmable acceleration and deceleration times which are independent of each other.  The 1336F-BRF200-AE-EN has an overload capacity of 115% for 1 minute, and of 150% of the rated output current for 3s, and it provides microprocessor-controlled high-temperature trips on the heatsink thermistor. It weighs about 15.90kg, with shipping dimensions of 260mm x 350mm x 212mm, and it comes in an IP20 (NEMA 1) enclosure. The 1336F-BRF200-AE-EN can withstand a 15G operational shock for 11ms, and it can resist a 1G peak vibration for 6+0 minutes. Its functional temperature range is 0 to 40°C (32 to 104°F), while its non-operational range is -40 to 70°C (-40 to 158°F), at 5 to 95% non-condensing humidity, and it designed for use at up to 1000m above sea level.