The Allen-Bradley/Rockwell Automation 1336F-BRF200-AE-IT is an adjustable frequency AC drive from the 1336 PLUS II line of products that are specially engineered for use in industrial settings. This drive has A4 frame, and it is 260 millimeters (10.24 inches) wide, 350 millimeters (13.78 inches) high, and 212 millimeters (8.35 inches) deep. The unit is housed in an IP20/NEMA Type 1 enclosure, and it weighs about 15.9 kilograms (35 pounds). The 1336F-BRF200-AE-IT is a high-impact and low-cost solution for most industrial automation systems. Reducing the motor speed with this AC drive can bring many benefits, especially in the systems and applications where the most electricity is consumed by motors. It provides a longer life to the equipment it controls, it reduces energy consumption, and it minimizes noise. The sensorless vector control method that is implemented in this drive makes motor accelerations and decelerations happen instantly when the torque level that is applied to the motor is changed. This is all conducted with smooth transitions that save bearings, shafts, and couplings from overloads.

The 1336F-BRF200-AE-IT 3-phase AC drive requires a power input ranging from 380 to 480 Volts AC. Alternatively, it can be supplied with 513 to 620 Volts DC voltage from separately installed input terminals. On the input side, the drive takes 28 Amps of current, and it must be protected with a fuse (rated at 35 to 60 Amps). The drive delivers 20 Horsepower of output to the motor. It encompasses ground fault protection, short-circuit tripping, and AC input and bus overvoltage and undervoltage protection. The set-up and commissioning of the 1336F-BRF200-AE-IT should be performed by qualified technicians in order to avoid the hazard of electric shock or equipment damage. The default programming language on the 1336F-BRF200-AE-IT drive is Italian.