The 1336F-BRF200-AN-EN-HAS2-L4E drive is a 1336 PLUS II drive manufactured by Allen-Bradley. It is rated at 380 to 480 Volts AC or 513 to 620 Volts DC voltage, 20 Horsepower or 15 kilowatts of output power, 28 Amps of input current, 27 Amps of output current, 18 to 23 kVA input, and 22 kVA output. It has TTL contact and encoder feedback control interface options, and it features 2 acceleration/deceleration times that can be separately programmed within the range of 0 and 3,600 seconds. It has an English language module and its efficiency is 97.5% of its rated current. The drive-mounted programmer/controller with digital pot and uploading/downloading-capable human-machine interface on the 1336F-BRF200-AN-EN-HAS2-L4E PLUS II drive has 2 major sections which are the display panel containing an LCD for viewing parameters and the control panel consists of a programmer keypad type. Note that this drive also supports the use of handheld HMIs.

Extended hold braking is available on the Allen-Bradley 1336F-BRF200-AN-EN-HAS2-L4E PLUS II drive. To improve uptime, this drive can be programmed to automatically reset and resume operation once a fault is cleared and its run on startup mode in unsupervised applications. External modules and controllers are connected to this drive through its SCANport communication port. The 1336F-BRF200-AN-EN-HAS2-L4E PLUS II drive has constant and variable torque capabilities. Its slip compensation usually provides 0.5% speed regulation and its proactive current limit minimizes trips during operation. This drive is compatible with Allen-Bradley’s PLC and SLC devices. Apart from the HMI, the status LEDs and fault alarms on this drive notify operators of fault conditions.