The 1336F-BRF30-AA-EN-HASP-L6 drive is a 1336 PLUS II series drive manufactured by Allen-Bradley. Its voltage range is 380 to 480 Volts AC or 513 to 620 Volts DC, it has a 115 Volts AC control interface, and its power ratings are 2.2 kilowatts or 3 Horsepower. The constant torque ratings of this drive are 4.2 to 5.1 input kVA, 4.2 output kVA, 6.4 Amps of input current, and 5.3 Amps of output current. The 1336F-BRF30-AA-EN-HASP-L6 is equipped with speed control capabilities for a wide array of applications. Regardless of the differences in motor sizes and ratings, the 1336F-BRF30-AA-EN-HASP-L6 PLUS II drive can control multiple motors with ease through its Volts per Hertz control mode. For applications with varying loads, this drive provides a dynamic response to loads through its slip compensation feature. It offers optional closed loop speed regulation and it can run off DC bus energy during short power interruptions unless the bus voltage falls below 85%.

The 1336F-BRF30-AA-EN-HASP-L6 PLUS II drive is equipped with a programmer-only human-machine interface module. If line power is lost and then restored during operation, the drive can resume operation by reading the encoder if 1 is made available. In the absence of an encoder, it can resume operation by reconnecting at the last known output frequency, or by determining the motor’s speed by using the flying start. The 1336F-BRF30-AA-EN-HASP-L6 PLUS II drive is designed with industrial productivity in mind. Its protective components guard against unplanned interruptions and its output current can be monitored selectively to allow for preventive maintenance without powering down the drive.