The 1336F-BRF30-AN-EN-GMS1-L5 drive is an adjustable frequency drive that has been manufactured and developed by Allen-Bradley/Rockwell Automation. The purpose of this drive is to control motors that require variations in their speed and torque, this is generally specified by the kind of application and the rest times that have been established for the motor. This drive operates with both AC and DC voltages that range from 380 to 480 Volts AC and 513 to 620 Volts DC along with a nominal Horsepower rating of 3 Horsepower. The Allen-Bradley 1336F-BRF30-AN-EN-GMS1-L5 adjustable frequency drive comes with an open enclosure that is IP 00 rated. This enclosure does not provide full protection against external particles like a full enclosure would. The maximum temperature supported by the drive within this kind of enclosure is 50 degrees Celsius.

The Allen-Bradley 1336F-BRF30-AN-EN-GMS1-L5 adjustable frequency drive needs to be installed in a vertical position while keeping the minimum clearances at the top, bottom, and sides of the drive. These clearances are a distance of approximately 152.4 millimeters vertically (above and below) and 101.6 millimeters horizontally (on each side of the drive). The Allen-Bradley 1336F-BRF30-AN-EN-GMS1-L5 adjustable frequency drive interface comes programmed in English and it features single-point remote I/O as a communication option and a 24 Volts AC/DC control interface. These last 2 features are additional features that were added to the base drive to enhance its functioning and overall operations. It is recommended to ground the drive to avoid electromechanical interference and to enable clearer signals between the drive and the motor.