The 1336F-BRF50-AA-EN-HAS2-L5 is a basic model of the 1336 PLUS II Drive series of motor controllers manufactured by the Allen Bradley brand. This device provides facilities in need of an automation motor controller in an internal environment an affordable option to meet the demands of the latest technology and hardware settings that have been installed within the facility. The device provides an adjustable input and output frequency setting and has a relatively large support profile for motors that can be controlled through the use of the highly-customizable interface featured by the drive. The 1336F-BRF50-AA-EN-HAS2-L5 drive has two different input power options that can be configured based upon different factors, such as power requirements of the output device, and power options available in the facility where the drive is installed. These settings include an AC power input option that can support a voltage range from 380 to 480 Volts. Additionally, the settings for the input power can also be configured to support DC power, which can be adjusted between a voltage range of 513 to 620 Volts.

A power output setting can be set to support attached motor devices that require a horsepower input between one and five horsepower. This setting is somewhat dependent on the particular options set during the input power selection mode and voltage, which can be adjusted based on the requirements of the facility. The 1336F-BRF50-AA-EN-HAS2-L5 drive comes with an IP20 NEMA 1 enclosure that offers a basic level of protection against different hazards that are usually present in factories. The hazards that the device is protected from due to its enclosure includes exposure to larger, solid objects. This may include tools used in the facility, as well as human contact with the device. This drive does not provide any protection against water and other liquids, and may also not be appropriate in a facility where small particles are frequently present. A convenient onboard configuration unit ensures the drive can easily be configured and different settings can be adjusted to comply with the requirements of the hardware that has been connected to the device. These onboard configuration units feature an LCD display and are accompanied by a keypad.