The 1336F-BRF50-AA-EN-HCSP-LA4 is an AC drive that can be used to control a connected motor in different settings within an industrial facility. This is a high-performance device that features more advanced features than many alternative options currently available to factories and other facilities. The device is manufactured by the Allen Bradley brand and belongs to the 1336 PLUS II Drive range of high-quality products. This device has a large number of configurable settings that can be adjusted manually through the use of a custom programming solution or the built-in interface, allowing for accurate delivery of power to meet the particular requirements of the attached motor. The 1336F-BRF50-AA-EN-HCSP-LA4 comes with two different input power settings that can be switched between depending on the available power settings in the facility where the AC drive is used, as well as the power requirements of the hardware that will be connected to the AC drive. Both AC and DC input power is supported by the device, with an AC input voltage support for ranges between 380 and 480 Volts. DC input voltage support ranges between 513 and 620 Volts. The output power settings of the device can be set to produce up to five horsepower, which will be dependent on the features and compatibility of the motor that will be controlled with this AC drive.

For adequate protection against the various physical hazards that the environment within the facility may produce, an IP20-certified, NEMA Type 1 enclosure is installed on the 1336F-BRF50-AA-EN-HCSP-LA4. This enclosure offers protection for the AC drive against contact by workers in the facility, as well as other larger physical and solid objects. The enclosure does not provide water-resistant or water-protection features and is not appropriate for environments where excessively small particles are frequently presenting a hazard to internal hardware devices. Programming can be easily done on the integrated configuration interface featured by the 1336F-BRF50-AA-EN-HCSP-LA4. An LCD display unit, together with an input keypad unit, allows for the operator to adjust all essential settings, such as output power delivered to the connected motor, without the need to connect the AC drive to external programming devices.