The Allen-Bradley 1336F-BRF50-AN-EN-HASP-L5E AC drive is a 1336 PLUS II series AC drive. Its output power rating is 5 Horsepower and the drive has both constant and variable torque capabilities. The 1336F-BRF50-AN-EN-HASP-L5E is designed for 380 to 480 Volts AC input voltage and 47 to 63 Hertz is a range of input frequency supported by the drive. The output current and power ratings in constant torque mode are 8.4 Amps and 5 Horsepower, respectively, while the input current is 10 Amps. The output current and power ratings in the variable torque mode are 9 Amps and 5 Horsepower, respectively, while the input current is 10.7 Amps. The 1336F-BRF50-AN-EN-HASP-L5E is available in an open A3-frame enclosure which is rated at IP00. Weighing 6.7 kilograms, the enclosure measures 11.42 x 8.50 x 4.1 inches.

The 1336F-BRF50-AN-EN-HASP-L5E drive dissipates 29 Watts of heat and the heatsink on the drive dissipates 84 Watts of heat, leading to a total dissipation of 113 Watts of heat. To maintain the ambient temperature around the drive within the recommended temperature range of 0 to 50 degrees Celsius, Allen-Bradley recommends the following minimum spacing between adjacent mounted drives: a horizontal spacing of 4 inches and a vertical spacing of 6 inches. The ambient humidity should be kept between 5 and 95%. The location where the drive is installed should be clear of corrosive contaminants. The HMI on the 1336F-BRF50-AN-EN-HASP-L5E includes a programmer and supports English as its default programming language. The control interface on the 1336F-BRF50-AN-EN-HASP-L5E supports 24 Volts DC and 24 Volts AC voltage. An encoder for feedback is also provided on the AC drive. The supported motor control methods include Volts per Hertz and sensorless vector control.