The 1336F-BRF75-AA-EN-GMS5 drive is a 1336 PLUS II drive manufactured by Allen-Bradley. It is rated at 380 to 480 Volts AC or 513 to 620 Volts DC, 3-phase voltage, 5.5 kilowatts or 7.5 Horsepower of output power, and at 8.8 to 11.3 input kVA, 13.6 input Amps, 10.6 output kVA, and 13.3 output Amps of torque. This drive is equipped with outstanding speed, torque, and brake capabilities that are ideal for meeting a wide array of industrial speed control needs. It features an IP20 (NEMA 1) enclosure and it has a good level of immunity for externally generated interference. A range of features on the 1336F-BRF75-AA-EN-GMS5 1336 PLUS II drive allows it to provide improved torque performance across a wide speed range. Its slip compensation ensures a dynamic response to varying loads and its programmable sensorless vector control delivers excellent torque and speed control in low-speed applications while improving acceleration in bigger motors.

The proactive current limit of the Allen-Bradley 1336F-BRF75-AA-EN-GMS5 1336 PLUS II drive minimizes trips and the drive’s digitally programmable input controls provide consistent performance. By disabling its line power loss parameter, this drive can ride through short power interruptions without stopping operation. In that situation, it runs off of the stored DC bus energy until the voltage level drops below 85%. To quickly get production underway after a power loss or a fault, the 1336F-BRF75-AA-EN-GMS5 drive’s reset/run feature can be programmed to automatically resume operation based on its last commanded speed and direction settings once the fault is cleared or the power is restored. The 1336F-BRF75-AA-EN-GMS5 1336 PLUS II drive features a GM5 communication adapter module with a snap-in cradle. This drive is designed to be connected directly to power supplies that match its ratings but it also supports the use of line reactors and transformers when the power source is prone to disturbances.