The 1336F-BRF75-AA-EN-GMS6-L5 drive is a Bulletin 1336 Plus II drive from Allen-Bradley that is an industrial automation motor control solution. The 1336F-BRF75-AA-EN-GMS6-L5 is mostly used in the industrial sector where torque control of induction motors is highly important. It also increases the efficiency and productivity of the induction motors. The drive runs with 3-phase power and it consumes AC voltage. The AC voltage in the drive is converted to DC voltage to make changes to the frequency for torque and speed regulation. The 1336F-BRF75-AA-EN-GMS6-L5 is equipped with enhanced protection features which is useful for ungrounded distributed systems. It comes attached with a metal oxide varistor which can help provide surge voltage protection and phase-to-phase and phase-to-ground protection in accordance with the IEEE 587 standards. It can only be used for surge suppression and not for continuous operation. The drive features different programming parameters to easily control the operation of the motor. It is equipped with 90 user parameters to select and control the drive operation and they can be accessed by using any of the programming and display panel.

The 1336F-BRF75-AA-EN-GMS6-L5 drive can only be installed and set up in an environment which meets certain environmental guidelines. Cabinet mounting should be done in an upright position with a minimum clearance of 102 millimeters on the top and bottom for ventilation. Also, 51 millimeters of clearance space should be left on each side for further proper ventilation. The drive should also be easily accessible for troubleshooting and maintenance. The 1336F-BRF75-AA-EN-GMS6-L5 drive can be operated at an altitude of 1000 meters above sea level without it getting derated. A relatively humid environment with 5 to 95% non-condensing relative humidity is necessary for proper operation. A heatsink thermistor is equipped in the drive to maintain the proper operating temperature of the drive.