The 1336F-BRF75-AA-EN-HCS2-L4 variable frequency AC drive is an Allen-Bradley manufactured drive. It comes from the Bulletin 1336 Plus II series of AC drives. Variable frequency drives are widely used in different industries for the regulation of torque and for controlling the speed of the motor. It provides out-of-the-box performance and it is cost-effective. These AC drives have a sturdy build and are manufactured to perform in harsh conditions. The 1336F-BRF75-AA-EN-HCS2-L4 drive is protected by a NEMA 1 enclosure which is certified with an IP20 rating. The flying start feature is present in this drive. This feature is mostly used when an application is required for picking up a spinning load at its current running speed and direction, and then it will accelerate or decelerate according to the commanded speed and direction. The drive can only be run at a temperature between 0 and 50 degrees Celsius.

The 1336F-BRF75-AA-EN-HCS2-L4 drive features the current limit capability. It supports a proactive current limit which can be programmed from 20% to 160% of the rated output current. It can also be independently programmed with proportional and integral gain. The inverse time overload capability adds Class 10 protection to the drive with a speed-sensitive response. The human-machine interface module of the drive comes with the snap-in cradle with the programmer controller with a digital pot and it comes with both uploading and downloading capabilities. The control interface of the 1336F-BRF75-AA-EN-HCS2-L4 has a TTL contact. The drive comes with 2 independently programmable acceleration and deceleration times. The inverse time overload capability of the drive is designed to meet the NEC and the UL equivalent requirements. It can be adjusted with a timing rated from 50 to 115% of the rated drive current. The overcurrent trip rating of the drive is 180% of the rated output current.