The Allen-Bradley 1336F-BRF75-AE-EN-HAS1-L6 drive is an industrial drive solution. It is an Allen-Bradley/Rockwell Automation drive and comes from the Allen-Bradley Plus II 1336 Bulletin drive series. The 1336 drive is a microprocessor-controlled, high-performance, adjustable frequency drive that is designed to control 3-phase induction motors on critical industrial applications. The drive is used to achieve accurate control, setup, and operation. The drive uses sine-coded PWM with programmable carrier frequency. The drive can be digitally controlled by using a local or a remote-control panel. It can also be configured through the serial communication port by using other option devices. The 1336F-BRF75-AE-EN-HAS1-L6 features real-time diagnostic features. It allows real-time preventive maintenance and it is coupled with customized status and fault reporting. The drive status and fault conditions can be reported through the human-machine interface module throughout the entire running period. All of the fault diagnostics start with both load and drive self-check diagnostics each time the drive is powered up.

The 1336F-BRF75-AE-EN-HAS1-L6 drive uses a 3-phase input voltage source and comes with a voltage rating of 480 Volts AC. The generated power output of the drive is 7.5 Horsepower. The enclosure of the drive has an IP20 rating and can only be used for indoor purposes. The drive should be protected from water sprays. Special care should be taken during the installation of the drive. The air flow between the nearest ventilation shaft and the heatsink of the drive should not be obstructed. The 1336F-BRF75-AE-EN-HAS1-L6 is equipped with a microprocessor-controlled heatsink thermistor. The thermistor trips the drive when it detects an excessive temperature inside the drive to save the drive from overheating. The drive is manufactured in a compact size and this small size conserves expensive panel space.