The 1336F-BRF75-AN-EN-HCSP-L5 drive is an AC motor controller drive that is designed and manufactured by Allen-Bradley. The controller is supplied with an English user manual to help in the installation and troubleshooting procedures. When the users are preparing to replace the main control board in the 1336F-BRF75-AN-EN-HCSP-L5 drive, the first thing that they should do is to lock out all of the incoming power to the controller. Then they can safely open the front cover, remove the human-machine interface module and take care of any communication option or control interface board problems by transferring them to the new main control board. Where a control interface board is missing, the jumpers at pins 3 and 4 and the ones at pins 17 and 18 should be transferred to the same location on the new main control board to keep the 1336F-BRF75-AN-EN-HCSP-L5 drive functioning.

After the jumpers have been transferred, the users should remove the human-machine interface module cradle. After removing this module, the users should remove any other cables from the controller and remove the main control board by removing the screws that are holding it in place before installing the new main control board. The users should note that the components should be interfaced with the new main control board in the reverse order of the order in which they were removed from the old main control board. After confirming that everything has been connected correctly, the users should apply input power to the 1336F-BRF75-AN-EN-HCSP-L5 and apply it without the load. The Rockwell Automation 1336F-BRF75-AN-EN-HCSP-L5 drive features a programmer-only human-machine interface module that supports uploading and downloading capabilities. The controller allows both AC and DC voltages (24 Volts) for its control interface option. The enclosure rating for the 1336F-BRF75-AN-EN-HCSP-L5 is the IP00 rating.