The 1336F-BRF75-AN-HASB-L6 drive is a 5.5 Horsepower variable frequency drive that is designed and manufactured by Allen-Bradley. The drive belongs to the Allen-Bradley 1336 PLUS 2 series of variable frequency drives. The drives in this series have a default Acceleration Time 1 rating and a Deceleration Time 1 rating of 10 seconds, respectively. However, Acceleration Time 1 and Deceleration Time 1 are adjustable between 0 and 3600 seconds. Also, the default maximum frequency for the 1336F-BRF75-AN-HASB-L6 is set at 60 Hertz, although it can be programmed anywhere from 25 Hertz to 400 Hertz. The drive’s minimum frequency is set by default at 0 Hertz but it can be programmed anywhere between 0.00 and 120 Hertz. The Allen-Bradley 1336F-BRF75-AN-HASB-L6 has a minimum AC input voltage of 380 Volts AC and a maximum AC input voltage of 480 Volts AC. The drive accommodates an open type of enclosure with an international protection rating of IP00.

The Allen-Bradley 1336F-BRF75-AN-HASB-L6 supports a snap-in cradle/blank plate for the human-machine interface module. The interface module has an ingress protection rating of IP20. The 1336F-BRF75-AN-HASB-L6, like other drives in the same series, uses Parameter 86 to Parameter 89 as Fault Buffer 0 to Fault Buffer 3 to store the most recent fault codes. By default, the 1336F-BRF75-AN-HASB-L6 has the line loss fault and the shear pin fault disabled. Among the few parameters that are read-only and that do not allow for manual configurations or alterations are the deceleration owner, fault owner, direction owner, rated voltage, rated current, and the drive’s rated CT current. The 1336F-BRF75-AN-HASB-L6 supports digital programming and a voltage of 115 Volts AC at its control interface.