Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-BX060-AJ-IT

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-BX060-AJ-IT

|
Need a Specific Revision?

The 1336F-BX060-AJ-IT variable-frequency drive is an advanced control unit from Allen Bradley's 1336 PLUS II Drives series. This drive operates at a nominal input voltage of 380 to 480 V AC, providing significant versatility for three-phase applications. With a continuous-torque current rating of 62 A, it can deliver a continuous output power of 60 kW, or approximately 80 HP.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-BX060-AJ-IT

ManufacturerAllen Bradley
Product TypeVariable-frequency drive
Product Line1336 PLUS II Drives
Part Number1336F-BX060-AJ-IT
Weight240.00 lbs (108.86 kg)
Nominal Input Voltage380–480 V AC three-phase (–10% to +10% tolerance)
Continuous-Torque Current Rating62 A (constant-torque mode)
Continuous-Torque Output Power60 kW (≈ 80 HP)
Variable-Torque Output Power45 kW (≈ 60 HP)
Enclosure ProtectionIP 54 (NEMA Type 12)
AC Overvoltage Trip Point570 V AC
AC Undervoltage Trip Point280 V AC
Nominal DC Bus Voltage648 V DC
Pulse-Width Modulation MethodSine-coded PWM synthesis
Carrier-Frequency RangeUp to 4 kHz (drive rating based)
Acceleration/Deceleration TimingIndependently programmable from 0.1 to 3600 s
Power Ride Through Capability15 ms at full load
Operating Ambient Temperature0 °C to 40 °C at ≤ 1000 m altitude
Efficiency at Rated Load97.50%
Request a Repair

The Allen Bradley 1336F-BX060-AJ-IT is a highly efficient variable-frequency drive for three-phase systems. This drive functions optimally within an input voltage range of 380 to 480 V AC, accommodating fluctuations of ±10%. It supports a continuous-torque output power of 60 kW, roughly equivalent to 80 horsepower. When employing variable torque, the output power can reach up to 45 kW, or about 60 HP.

Current capacity under constant-torque mode is maintained at 62 A, facilitating reliable application performance. For enhanced protection, the 1336F-BX060-AJ-IT features an enclosure rated at IP 54, ensuring durability against environmental factors according to NEMA Type 12 standards.

The drive boasts essential trip points, with the AC overvoltage set at 570 V AC and the undervoltage at 280 V AC, which help to safeguard the system during power fluctuations. This unit's nominal DC bus voltage is rated at 648 V DC, ensuring robust power delivery.

Furthermore, it employs a sine-coded PWM synthesis method, which is effective for precise motor control. The carrier frequency can operate effectively up to 4 kHz, driven by the specific ratings of the unit. Both acceleration and deceleration timings can be programmed independently, ranging from 0.1 to 3600 seconds, facilitating extensive control over motor operation. With a power ride through capability of 15 milliseconds at full load, this drive remains resilient during transient conditions. Finally, it functions optimally within an ambient temperature range of 0 °C to 40 °C at altitudes not exceeding 1000 meters. It maintains an impressive efficiency rating of 97.50% at rated load, making it a highly effective solution for various industrial applications.