The 1336F-BX060-AN-EN drive is a 1336 PLUS II series adjustable frequency AC drive that is manufactured by Allen-Bradley. It has a 45 kilowatts/60 Horsepower power rating, 75 Amps of current, and 480 Volts AC voltage at 50 to 60 Hertz and 62 KVA. It belongs to the English language group of Allen-Bradley drives and it has an IP00 (open) enclosure. Depending on its programming, this drive can take speed commands from different sources, including programmable logic controllers and its speed select inputs on TB3. The input and output signals of the 1336F-BX060-AN-EN PLUS II drive control the connected motors’ start/stop modes, so it does not require additional switching devices on its line circuit for turning the motors on or off. This drive also features jumpers that connect its I/O to TB2 in the absence of analog options.

When mounting the 1336F-BX060-AN-EN PLUS II drive, the recommended minimum mounting clearance for adequate airflow is 6 inches vertical and 4 inches horizontal. It features a built-in Metal Oxide Varistor that provides phase-to-phase and phase-to-ground protection as well as surge suppression (for transient protection only). Surge suppression devices on the 1336F-BX060-AN-EN protect it from the overvoltage that may be induced between the line and the ground by lightning. The 1336F-BX060-AN-EN 1336 PLUS II drive has a good level of immunity against externally generated EMI/RFI interference, but its cables have to be routed away from sensitive equipment that is connected to the same circuit. Other protective components that provide a smooth operation to the 1336F-BX060-AN-EN drive include overcurrent protection, undervoltage/overvoltage protection, and short-circuit protection on the drive output, and it runs system diagnostics during the startup to detect and handle faults.