Designed by Allen-Bradley, the 1336F-C030-AA-EN drive is an adjustable frequency drive in the 1336F Plus II drive series. The 1336F-C030-AA-EN drive has been specially designed for use on the 3-phase supply systems, designed with the symmetrical line voltages. The Allen-Bradley 1336F-C030-AA-EN 1336F Plus II drive features a surge suppression device that ensures drive protection from lightning-induced overvoltage between the line and the ground. The 1336F Plus II drives also feature a metal oxide varistor for providing voltage surge suppression and phase-to-phase and phase-to-ground protection that are designed to comply with the IEEE 587 standards. The 1336F Plus II drives are designed to be suitable for direct connectivity to AC lines with the correct voltage. The 1336F-C030-AA-EN drive features a power voltage range of 500 to 600 Volts AC and a Horsepower rating of 30 Horsepower. The 1336F-C030-AA-EN drive features input devices that are suitable for starting and stopping the motor.

The 1336F-C030-AA-EN drive also comes with an RFI filter for controlling the radio-frequency conducted emissions in the main supply lines and ground wiring. To ensure that there are no interference problems when using the 1336F-C030-AA-EN drive, ensure that the cabling and installation recommendations are all followed. When using the drive, it is essential to ensure that the paths through which the high-frequency grounds current flows are properly defined in order to make sure that the sensitive circuits will not share a path with the drive’s current. When using the encoder and communication cabling, this wiring must be separated from the drive’s power cabling. This can be accomplished through a carefully routed or shielded cable or by ensuring that the cables are laid out on a separate steel conduit that is grounded at both ends.