The Allen-Bradley 1336F-C040-AN-EN drive is a 40 Horsepower rated drive. It is part of the 1336F Plus II adjustable frequency drive series. The input of the 1336F-C040-AN-EN drive is rated at 500 to 600 Volts AC voltage at 47 to 63 Hertz frequency. The input should be 3-phase input because single-phase input is not supported on this C-frame drive. For the constant torque mode of operation, the drive input is rated at 38 to 45 kVA of power and 44 Amps of current and the drive’s output is rated at 40 Horsepower (30 kilowatts) of output power and 45 Amps of current. The open enclosure of the 1336F-C040-AN-EN has an IP 00 protection rating and it should be mounted vertically. Allen-Bradley provides minimum spacing recommendations of 4 inches of horizontal separation between adjacent drives and 6 inches of vertical separation between adjacent drives. These recommendations are designed to ensure that adequate space is available around the drive for heat dissipation. 

The total heat dissipation of the 1336F-C040-AN-EN drive is 853 Watts. The working temperature for the drive should be kept between 32 and 122 degrees Fahrenheit. The relative humidity should be maintained at a level between 5 and 95%, non-condensing. An English language module is available on the 1336F-C040-AN-EN drive. The 1336F Plus II drives such as the 1336F-C040-AN-EN drive can be used on a circuit that is capable of delivering a maximum of 200,000 rms Amps (symmetrical) at 600 Volts AC. The 1336F-C040-AN-EN drive is engineered to work on 3-phase systems where line voltages are symmetrical. An isolation transformer should be used in situations where high phase to ground voltages are present or where the ground potential can vary.