Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-C125-AN-EN-L6

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-C125-AN-EN-L6

|
Need a Specific Revision?

The 1336F-C125-AN-EN-L6 from Allen Bradley is a variable frequency AC drive designed for advanced motor control applications. It is engineered to operate on a three-phase input voltage range of 500-600 VAC, delivering a continuous power output of 93 kW.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-C125-AN-EN-L6

ManufacturerAllen Bradley
Product TypeVariable Frequency AC Drive
Product Line1336 PLUS II Drives
Part Number1336F-C125-AN-EN-L6
Weight240.00 lbs (108.86 kg)
Rated Input Voltage500-600 VAC Three-Phase
Continuous Power Output93 kW at Nominal Voltage
Constant Torque Motor Capacity125 HP (NEMA Design B Equivalent)
Variable Torque Motor Capacity125 HP (Optimized for Fan/Pump Applications)
Full-Load Current Rating138 Amps (CT/VT Mode at 500-600V)
Enclosure Protection StandardIP00 (Open Chassis, No Environmental Sealing)
Control Signal Voltage115 VAC Interface for Logic Inputs/Outputs
AC Overvoltage ProtectionAutomatic Trip at 690 VAC Input
AC Undervoltage ThresholdShutdown Trigger Below 343 VAC Input
DC Bus Overvoltage LimitFault Detection at 1013 VDC
DC Bus Undervoltage LimitProtection Activated Below 498 VDC
Nominal DC Link Voltage810 VDC Under Standard Operating Conditions
Overcurrent SafeguardsMulti-Stage: 20-160% Software Limit, 180-250% Hardware Cutoff
Request a Repair

The Allen Bradley 1336F-C125-AN-EN-L6 is a sophisticated variable frequency AC drive tailored to enhance the performance of three-phase systems by operating within an input voltage range of 500 to 600 VAC. It is proficient in delivering a continuous power output of 93 kW, accommodating constant torque and variable torque motor capacities at 125 HP, equivalent to NEMA Design B efficiency specifications.

Regarding current rating, this model handles a full-load current of 138 Amps when functioning in constant torque or variable torque modes at the designated voltage.

The drive incorporates several critical safety features to protect against potential electrical faults. It has an automatic trip mechanism that activates at 690 VAC for AC overvoltage conditions, while an undervoltage threshold triggers a shutdown when the input drops below 343 VAC. The DC bus is equally safeguarded with fault detection that initiates at 1013 VDC for overvoltage situations and activates protection at voltages below 498 VDC. Normal operating conditions maintain a nominal DC link voltage of 810 VDC.

Furthermore, the 1336F-C125-AN-EN-L6 includes multi-stage overcurrent safeguards. The software limit is adjustable between 20% and 160%, and a hardware cutoff engages at currents from 180% to 250% of rated values. The drive's open chassis design is rated IP00, signifying that it lacks environmental sealing, suggesting its suitability for clean, controlled environments. For control signal interfacing, it utilizes a 115 VAC standard interface to manage logic inputs and outputs.