This device serves as an entry-level motor controller that provides a variety of adjustable settings and convenient features to allow for an easy integration into smaller facilities. The devices feature a range of standard, built-in features that assist a facility in setting up a completely automated control system over motors that are used in their equipment settings. This device is a 1336 PLUS II Drive from Allen Bradley and provides similar performance and quality to other products within the same series of products from this brand. The 1336F-CWF10-AA-EN drive has an IP20 NEMA 1 enclosure installed over its internal hardware for optimal protection in an internal factory installation setting. This device does not serve the purpose of outdoor installations and should not be installed in a facility when liquid hazards are present since the enclosure does not provide any type of water-resistant features.

Adjustable input voltage line frequencies can be set to comply with the internal operations of the facility where the 1336F-CWF10-AA-EN drive is used. The adjustment can be made to set the power option to DC or AC, which will depend on the total power requirements of the attached motor, as well as the purpose of the motor. The DC power has a fixed input line rating of 775 Volts DC, while the AC power has an adjustable input line rating that can vary from 500 up to 600 Volts AC. The compatibility list featured by the 1336F-CWF10-AA-EN drive provides adequate support for a variety of motor models that has a one horsepower consumption. Devices connected with a larger power requirement may not perform at their peak or preferred level when coupled with this particular drive. Adjustment of the various configurable settings provided by the 1336F-CWF10-AA-EN drive can be made by using the integrated keypad unit and LCD display unit.