The 1.0 Horsepower-rated 1336F-CWF10-AA-EN-HASP-L4 drive is an Allen-Bradley 1336 PLUS II series adjustable frequency drive which complies with the following CE low voltage directives: the EN 60204-1 and the PREN 50178 directives. The 1336F-CWF10-AA-EN-HASP-L4 drive has constant torque capabilities and it operates at input voltages ranging from 500 to 600 Volts AC. The rated output power and current levels are 1.0 Horsepower (0.75 kilowatts) and 2 Amps, respectively. The input current rating is 2.4 Amps. The integrated human-machine interface is a programmer-only interface. Built-in control interface I/O on the drive support TTL contact.

The overvoltage and undervoltage thresholds for the input side of the 1336F-CWF10-AA-EN-HASP-L4 drive are 690 Volts AC and 343 Volts AC, respectively. The nominal drive bus voltage value is 810 Volts DC. The drive bus is configured to trip at 1013 Volts DC and at 498 Volts DC, which are the configured bus overvoltage and undervoltage threshold settings. The A4-type drive frame weighs 35 pounds and it has the following dimensions: 350 x 260 x 117 millimeters. The enclosure of the drive is a NEMA Type 1 enclosure which is rated as an IP20 enclosure. The recommended operating temperature range is from 32 to 104 degrees Fahrenheit. An operating 1336F-CWF10-AA-EN-HASP-L4 drive dissipates 54 Watts as heat, which includes 25 Watts that are dissipated by the drive and 29 Watts that are dissipated by the heatsink. The values of the recommended minimum vertical and horizontal spacing are 152 millimeters and 101 millimeters, respectively. Mounting the 1336F-CWF10-AA-EN-HASP-L4 on a combustible surface is not recommended.