1336F-LA1

The Allen-Bradley 1336F-LA1 Analog Interface Board is part of the 1336 Plus II drives series. This board supports only Slot B installation, and it is designed for all 1336 Plus II drive frame sizes. The Bulletin 1336 Plus II drives series is a series of high-performance and general-purpose AC drives. They are available in output ratings from 0.37 to 448 kilowatts and they provide a one-stop solution for all the speed and torque requirements of an industrial application. The 1336 Plus II drives all have similar designs and they support a common accessory line. The 1336F-LA1 Analog Interface Board provides an analog control interface for the host drive without any factory-installed options. The 1336F-LA1 Analog Interface Board is a dual analog output board which replaces the 2 standard analog outputs with 2 configurable single-ended, high-resolution analog outputs (labelled Analog Output 0 and Analog Output 1) and 1 non-isolated configurable analog input (including the pot).

The Allen-Bradley 1336 Plus II series 1336F-LA1 Analog Interface Board’s Analog Output 0 is configured for either 0 to 10 Volts DC or 0 to 20 milliamps rated operation, while Analog Output 1 is configured for only 0 to 20 milliamps rated operation. The 1336F-LA1 Analog Interface Board’s analog input maintains access to the standard non-isolated Input 2 via the terminal block. The configuration of the analog input is achieved via wiring of the J11 connector to the TB2-6 terminals. The 1336F-LA1 Analog Interface Board’s analog output is designed to drive up to 3.3 Kiloohms of load at 0 to10 Volt DC operation and 400 Ohms of load for 0 to 20 milliamps operation. Both the input and output circuits of the 1336F-LA1 Analog Interface Board are designed with galvanic insulation and with a maximum insulation rating of 200 Volts AC.