Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 1336-B003-EAD-FA2-L2

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336-B003-EAD-FA2-L2

|
Need a Specific Revision?

The Allen-Bradley/Rockwell Automation 1336-B003-EAD-FA2-L2 AC drive is an adjustable frequency drive from the Bulletin 1336 drive series. It is designed to operate with 3-phase AC voltage ratings of 380 Volts AC, 415 Volts AC, or 460 Volts AC at 50 to 60 Hertz of rated operating frequency. The 1336-B003-EAD-FA2-L2 adjustable frequency drive can adjust the speed and torque ratings of an AC motor by adjusting its frequency ratings and by changing the level of frequency that it applies to the AC motor. It can support a 24 Volts DC rated logic interface board. The 1336-B003-EAD-FA2-L2 adjustable frequency drive should only be used indoors in non-hazardous environments because it only has an IP 20 protection rating.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336-B003-EAD-FA2-L2

ManufacturerAllen Bradley
Product TypeAdjustable Frequency AC Drive
Product Line1336
Part Number1336-B003-EAD-FA2-L2
Weight34.38 lbs (15.59 kg)
Input Voltage380/415/460V AC
Hz50/60
Phases3
Amps Out6
KVA Out @ 380V AC3.9
KVA Out @ 415V AC4.3
KVA Out at 460V AC4.8
Enclosure TypeNEMA Type 1 (IP20)
Enclosure Amp Rating003, 005, 007, or 010
OptionBasic control panel for open or NEMA Type 1 enclosures
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1336-B003-EAD-FA2-L2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-B003-EAD-FA2-L2 units instead of migration.

View as PDF
Request a Repair

The 1336-B003-EAD-FA2-L2 is a 3 Horsepower variable frequency air-cooled drive manufactured by Allen-Bradley. The 1336-B003-EAD-FA2-L2 is classified under the 1336 drive series and it features the IP20 NEMA Type 1 enclosure with an enclosure amp rating of 010, 007, 005, or 003. The frequency rating for the 1336-B003-EAD-FA2-L2 is 50 to 60 Hertz with a voltage rating of 380/460/415 Volts. The 1336-B003-EAD-FA2-L2 also comes with 3.9 KVA at 380 Volts, 4.3 KVA at 415 Volts AC, and 3.9 KVA at 380 Volts AC. The 1336-B003-EAD-FA2-L2 comes with a digital frequency source as 0.0013% of the set frequency as the frequency regulation. The 1336 series module features full programmable Volts per Hertz control with a minimum range of 1 to 14.3 Volts per Hertz through the local programming while the wider ranges are available through the optional programming.

The 1336 drives come with a drive logic that utilizes a set of 90 user parameters that select and control the operation of the drives. For the 1336-B003-EAD-FA2-L2, 71 parameters are accessible through either of the programming and the display panels. The 90 parameters are all accessible through the provided serial port. During the installation of the 1336-B003-EAD-FA2-L2, it is important to ensure that the cabinet is mounted in an upright position. This creates enough room for a minimum clearance on both the top and the bottom ensuring proper ventilation as well. In addition, the installer should make sure the drive is accessible for easy maintenance and troubleshooting. The 1336-B003-EAD-FA2-L2 should be installed in an ambient atmosphere where there is no volatile or corrosive gas, no vapors, and no dust. The relative humidity for the 1336-B003-EAD-FA2-L2 is 5 to 95%, non-condensing.

Revision Part #Also known as
1336-B003-EAD-FA2-L2 Ser A1336-B003-EAD-FA2-L2/A, Series A, Rev A
Don't see your particular revision? Contact us now.