Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 1336 1336-B003-ECD-L3

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336-B003-ECD-L3

|

The Allen-Bradley 1336-B003-ECD-L3 AC drive is a Bulletin 1336 adjustable frequency drive that is used to control AC motors in a variety of applications. It is protected by a strong enclosure with an IP 56 environmental protection rating. The 1336-B003-ECD-L3 adjustable frequency drive’s enclosure protects it from moderate amounts of dust, small pieces of debris, and small amounts of water and other non-corrosive liquids. It can operate at 380, 415, or 460 Volts AC with a frequency rating between 50 and 60 Hertz. The 1336-B003-ECD-L3 adjustable frequency drive comes with an L3 logic interface board that is rated at 115 Volts AC.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336-B003-ECD-L3

ManufacturerAllen Bradley
Product TypeAdjustable Frequency AC Drive
Product Line1336
Part Number1336-B003-ECD-L3
Weight25.00 lbs (11.34 kg)
Input Voltage380/415/460V AC
Hz50/60
Phases3
Amps Out6
KVA Out at 380V AC3.9
KVA Out at 415V AC4.3
KVA Out at 460V AC4.8
Enclosure TypeNEMA Type 4 (IP56)
Enclosure Amp Rating003, 005, 007, or 010
Option115 V AC Logic Interface Board.
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1336-B003-ECD-L3 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-B003-ECD-L3 units instead of migration.

The 1336-B003-ECD-L3 is an adjustable frequency AC drive manufactured by Allen-Bradley. The Allen-Bradley 1336-B003-ECD-L3 AC Drive belongs to Series A of the Allen-Bradley adjustable frequency AC drives. The Allen-Bradley 1336-B003-ECD-L3 AC Drive feature 460 Volts input voltage at 60 Hertz and equipped with 3-phase power. The Allen-Bradley 1336-B003-ECD-L3 AC Drive is contained in a NEMA Type 4 (IP56) Enclosure Type chassis. The Allen-Bradley 1336-B003-ECD-L3 AC Drive has an auxiliary interlock input terminal connection on the Logic interface board that provides a necessary input for the start commands.

The Allen-Bradley 1336-B003-ECD-L3 AC Drive will not recognize a start command unless the auxiliary input is logically accurate. The auxiliary interlock is supplied by the users as a circuit such as a reset, overload, or some logical true-state connection associated with the drive auxiliary input. When the Allen-Bradley 1336-B003-ECD-L3 AC Drive incurs default functions; the AC drive automatically changes to a pre-programmed setting by the manufacturer. The user should wear a wrist grounding strap when servicing the Allen-Bradley 1336-B003-ECD-L3 AC Drive to prevent damaging the AC drive components due to electrostatic discharge. When installing the Allen-Bradley 1336-B003-ECD-L3 AC Drive, the users should clean all surfaces between Bridge Rectifier BR1 and the heatsink using a soft, clean cloth.

Revision Part #Also known as
1336-B003-ECD-L3 Ser A1336-B003-ECD-L3/A, Series A, Rev A
Don't see your particular revision? Contact us now.