Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 1336 1336-B003-EJD

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336-B003-EJD

|

The Allen-Bradley/Rockwell Automation 1336-B003-EJD drive is an adjustable frequency drive from the Bulletin 1336 drive series. It supports 3-phase voltage ratings of 380, 415, or 460 Volts AC, all with a frequency range of 50 to 60 Hertz. The 1336-B003-EJD adjustable frequency drive uses its adjustable frequency to control the torque and speed of a connected motor. Its enclosure has an IP 54 environmental protection rating. The 1336-B003-EJD adjustable frequency drive supports an operating temperature range from 0 to 40 degrees Celsius.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336-B003-EJD

ManufacturerAllen Bradley
Product TypeAdjustable Frequency AC Drive
Product Line1336
Part Number1336-B003-EJD
Weight24.38 lbs (11.06 kg)
Input Voltage380/415/460V AC
Hz50/60
Phases3
Amps Out6
KVA Out at 380V AC3.9
KVA Out at 415V AC4.3
KVA Out at 460V AC4.8
Enclosure TypeNEMA Type 12 (IP54)
Enclosure Amp Rating003, 005, 007, or 010
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1336-B003-EJD has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-B003-EJD units instead of migration.

The 1336-B003-EJD is an Adjustable Frequency AC Drive manufactured by Allen-Bradley. The Allen-Bradley 1336-B003-EJD belongs to the 1336 Adjustable Frequency AC Drives Series A. The Allen-Bradley 1336-B003-EJD features 3 phases, 6 Amps of current output, 3.9 kVA output at 380 Volts AC and 380/415/460 Volts input voltage. The Allen-Bradley 1336-B003-EJD is housed in a NEMA Type 12 (IP54) Enclosure Type. The voltage on each phase of the incoming line to the Allen-Bradley 1336-B003-EJD AC drive should match the input rating, however, if the incoming line voltage is out of this tolerance range, the Allen-Bradley 1336-B003-EJD AC drive may be damaged or fail to operate.

The users should not use common cabling for AC input or output leads when the Allen-Bradley 1336-B003-EJD is connected to other AC drives. Also, all the signal wiring should be run separate from the power or control wiring, and the shields should be grounded at the drive end, but only at one of the ground lugs provided. A transient suppression network is added across the coils of the Allen-Bradley 1336-B003-EJD to prevent erratic behavior due to brake coil electrical noise transients. The Allen-Bradley 1336-B003-EJD is equipped with a chassis ground used to connect the drive chassis to a common ground and also the frame must be connected to the same common ground. The Allen-Bradley 1336-B003-EJD can protect the output power components for adequate performance when insufficient load inductance occurs.

Revision Part #Also known as
1336-B003-EJD Ser A1336-B003-EJD/A, Series A, Rev A
Don't see your particular revision? Contact us now.