1336-B003-EJD-RP3

The 1336-B003-EJD-RP3 is an adjustable frequency AC drive manufactured by Allen-Bradley. The Allen-Bradley 1336-B003-EJD-RP3 is part of Series A of the 1336 Adjustable Frequency AC Drives. The Allen-Bradley 1336-B003-EJD-RP3 operates with a 380/415/460 Volts AC input voltage at 50/60 Hertz, 6 Amps of output current, and 3 phase configuration. The Allen-Bradley 1336-B003-EJD-RP3 is housed in a NEMA Type 12 (IP54) Enclosure Type. When the Allen-Bradley 1336-B003-EJD-RP3 is set to receive control signals and data from a programmable controller via the MOD-G2 Remote I/O communication option, the programmable controller should be tested with the AC drive motor disconnected from the load.

During initial operation, the users should apply power and prepare to operate the Allen-Bradley 1336-B003-EJD-RP3 under actual control and load conditions. It is desirable to begin at low torque and speed. The Allen-Bradley 1336-B003-EJD-RP3’s regeneration condition is indicated by a 110% nominal bus voltage that does not allow the AC drive decelerate to a lower frequency, hence it has a longer deceleration time or else dynamic braking may be required. The Allen-Bradley 1336-B003-EJD-RP3 is equipped with a contact closure interface board which provides a means of interfacing various signals and commands by utilizing contact closures. The enable input option should be a maintained true input to permit the Allen-Bradley 1336-B003-EJD-RP3 to run and jog the motor. If the input is false for 20 milliseconds or longer; the AC drive operating capabilities will not be permitted, and the outputs will be disabled, forcing the motor to stop.