1336-B003-EOD-FA2

The Allen-Bradley 1336-B003-EOD-FA2 converter is a continuous torque AC frequency converter. It is mainly used to power industrial motors, but it can be also applied in critical commercial and home applications. The 1336-B003-EOD-FA2 converter accepts 380 to 460 Volts AC voltages at input terminals with the following input power-related information: 3.8 kVA of input power at 380 Volts AC, 4.1 kVA of input power at 415 Volts AC, and 4.5 kVA of input power at 460 Volts AC. At the output side, the 1336-B003-EOD-FA2 converter has a voltage rating between 0 and 460 Volts AC in relation to the frequency, and the output power values are 3.9, 4.3, and 4.8 kVA at 380, 415, and 460 Volts AC, respectively.

The output power of the Allen-Bradley 1336-B003-EOD-FA2 converter is delivered through a sine-coded pulse width modulated waveform and the frequency at the output varies between 0 and 250 Hertz. This device comes with an IP 00 (open) enclosure that has dimensions of 283 millimeters by 477 millimeters by 223 millimeters. It is equipped with digital inputs (start, stop, enable, reverse, and jog inputs), analog inputs (speed reference inputs), digital outputs (run, at speed, and fault outputs), and analog outputs (0 to 5 Volts DC for the output frequency or the percent of drive load current feedback). The 1336-B003-EOD-FA2 converter is programmable through a serial port. The users have a set of 90 parameters available to control drive operation and adjust it to the application’s needs. A steel conduit is recommended for the control and power wiring of the device and mandatory for all the signal wiring.