1336-B003-EOD-FA2-L1

The Allen-Bradley 1336-B003-EOD-FA2-L1 adjustable frequency AC drive is a microprocessor-controlled high-performance variable speed drive designed to provide both speed and torque control to motors in high-performance closed-looped motion systems. This drive provides 3-phase adjustable PWM frequency output power for precise motor voltage and speed control, and it is digitally programmed to help achieve precise and repeatedly accurate control, operation, and setup. The 1336-B003-EOD-FA2-L1 drive has an acceptable 3-phase input voltage range of 380 to 460 Volts AC (at 48 to 62 Hertz) and a nominal output current rating of 6 Amps. It has a real output power rating of 4.8 kVA, and a displacement power factor value of 0.95 at the full current rating. All 1336 AC drives are designed for direct connection to the correct 3-phase power lines, but a line reactor or an isolation transformer may be used if the power condition becomes unsuitable for drive operation. The 1336-B003-EOD-FA2-L1 drive has a self-diagnostics function that is automatically initiated upon startup, and it has real-time preventive and monitoring capabilities that help to isolate problems and allow corrective measures to be taken to restore normal operation.

The 1336-B003-EOD-FA2-L1 drive provides output control via a sine-coded pulse width modulated adjustable output frequency which controls the output voltage for accurate speed control (the maximum output voltage cannot exceed the applied input voltage). The 1336-B003-EOD-FA2-L1 drive offers programmable Volts per Hertz control, and 2 independently programmed acceleration and deceleration times. This drive has a local programming and display panel for quick configuration, trouble-shooting, and monitoring of drive status, and a 5 Volts DC TTL Logic contact closure interface board option for additional control. The 1336-B003-EOD-FA2-L1 drive comes with an open (IP 00) enclosure, and it has an operating temperature range of 0 to 40 degrees Celsius.