The Allen Bradley 1336-B005-ECD-FA2-L1 Adjustable Frequency AC Drive is a digital AC drive with direct 3-phase line input connection, which is designed to control the speed of induction motors using Pulse Width Modulated signals, 3-phase output, and an adjustable output frequency. This drive is programmed digitally to achieve precise and repeatedly accurate control, setup and operation, and it is configured using factory supplied control panel option for local control, and control interface option with pre-factory designated command functions. The 1336-B005-ECD-FA2-L1 has an output power rating of 7.3 Kilo Volt-Ampere, with an input current of 9.3 Amperes, and it has an operating voltage range of 380 to 460 Volts AC. It also has a 9.6 Ampere input current rating at 460 Volts, with a 7.6 Kilo Volt-Ampere output power rating, and it has a displacement power factor of 0.95. The 1336-B005-ECD-FA2-L1 is designed to provide a fast acting current limit, and it can regulate the BUS AC/DC voltage for efficient operation. It can also sense ground faults from irregular line input current, and it is fitted with line to line and line to ground wired Metal Oxide Varistor, which provides phase-to-phase and ground fault protection on the drive’s output. This drive has an overload capability, programmable from 50% to 150% of rated output current, and it can provide Class 10 motor overload protection. The 1336-B005-ECD-FA2-L1 can ride through 2 seconds of power outage (dependent on the integrity of user-supplied circuit), and it can also provide protection against any transient voltage up to 5000 Volts. It is programmed by default for Volt per Hertz control, and it uses Pulse Width Modulated output waveform for control. It has an output frequency range, programmable from 0 Hertz (minimum) to 250 Hertz (maximum), and its output voltage is adjustable from 0 to its applied input voltage value. The 1336-B005-ECD-FA2-L1 has a control panel option, which allows for configuration of the drive locally, and it also has a 5 Volt DC Logic control interface board, which provides the drive with basic operation commands. It has a rated ambient range of 0 to + 40 degree Celsius, and it is enclosed with a NEMA type 4 enclosure, which provides protection against water, dust, ice, corrosion, and other external contaminants. The 1336-B005-ECD-FA2-L1 has an approximate weight of 16.5 kilograms, and dimensions of 283 x 477 x 223 millimeters.