1336-B005-EOD-L3-S1

The 1336-B005-EOD-L3-S1 drive is an Allen-Bradley adjustable frequency AC drive that features a serial port connector and a 115 Volts AC logic interface board. The 1336-B005-EOD-L3-S1 drive comes with the IP 00 open-style enclosure and it features an enclosure current rating of 003, 010, 007, or 005 Amps. The unit comes with an input voltage rating of 460/415/380 Volts AC. The KVA output is usually dependent on the input voltage rating. For 380 Volts AC, the KVA output is rated at 6.3. At 415 Volts AC, the KVA rating is 6.9 and at 460 Volts AC, the KVA output rating is 7.6. The 1336-B005-EOD-L3-S1 drive features printed circuit boards and drive components that might contain hazardous voltage levels. Check the neon light that is attached to the base driver board to determine if the printed circuit boards might contain hazardous voltage levels. If the neon voltage light is illuminated, this means that the boards contain hazardous voltage.

The 1336-B005-EOD-L3-S1 drive’s logic interface board helps to avoid controller problems and error loops. The 1336 Logic interface board is usually located on the main control board and just below the programming and display boards. The 1336-B005-EOD-L3-S1 drive comes with a standard basic drive control and fault display screen with diagnostic procedures that refer to both the program panel and the optional local control panel. The drive’s local programming information can be viewed simply by using the 4 pushbuttons that appear on the local display and programming panels. The users can view these parameters while the drive is running.