The 1336-B007-EAD-FA2-L3 is a member of the 1336 Series Allen-Bradley Adjustable Frequency AC Drive family. It works with 380 to 460 Volts AC three-phase power lines. Depending on the input line voltage connected to it, it can produce 8.6 kVA to 10.4 kVA at the output. It has a logical interface board designated with the L3. This board provides users with an additional 115 Volts AC logic interface to other industrial automation devices. The 1336-B007-EAD-FA2-L3 is made of high-quality materials, it is shock-resistant, and it is anti-corrosive. Users can input parameters and control this AC drive over an integrated basic control panel unit. The output of the drive is controlled by the microprocessor which uses sensorless vector control or volts per hertz control to optimize the motor’s behavior at different torque levels. The output frequency can be changed within the 0 to 250 Hertz range.

To run the drive, users will provide the start, stop, and enable digital signals to it. The speed reference is passed to it over 0 to 10 Volts DC analog signal. The Allen-Bradley 1336-B007-EAD-FA2-L3 has Metal Oxide Varistors integrated inside of it to provide surge protection for the motor and itself. The module’s enclosure is IP20 rated. Despite the device’s high power rating, it is a compact module that measures 11.13 inches x 18.75 inches x 8.76 inches (283 millimeters x 477 millimeters x 223 millimeters) in overall dimensions. It is built to provide rational use of energy, to guarantee the continuity of the productive process, and to decrease losses. The storage temperature range for this drive is -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) and it should be operated in environments with air temperature less than 40 degrees Celsius (104 degrees Fahrenheit).