Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 1336 1336-B007-ECD

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336-B007-ECD

|

The Allen-Bradley/Rockwell Automation 1336-B007-ECD drive is a basic adjustable frequency drive from the Bulletin 1336 series. It does not come with any interfaces or with a serial port or control panel. The 1336-B007-ECD adjustable frequency drive supports 3-phase AC input voltage ratings of 380/415/460 Volts AC. Its operating frequency range is from 50 to 60 Hertz and its operating temperature range is from 0 to 40 degrees Celsius. The 1336-B007-ECD adjustable frequency drive comes with an IP 56 rated NEMA Type 4 enclosure for protection.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336-B007-ECD

ManufacturerAllen Bradley
Product TypeAdjustable Frequency AC Drive
Product Line1336
Part Number1336-B007-ECD
Weight40.00 lbs (18.14 kg)
Input Voltage380/415/460V AC
Hz50/60
Phases3
Amps Out13
KVA Out @ 380V AC8.6
KVA Out @ 415V AC9.3
KVA Out at 460V AC10.4
Enclosure TypeNEMA Type 4 (IP56)
Enclosure Amp Rating003, 005, 007, or 010
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1336-B007-ECD has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-B007-ECD units instead of migration.

The 1336-B007-ECD is an Adjustable Frequency AC drive manufactured by Allen-Bradley. It is a solid-state drive, made to control the speed of three-phase AC motors. This bulletin 1336 device receives power supply of 380, 415, or 460 Volts AC. It will put out 8.6, 9.3, or 10.4 kVA, respective to the voltages. The maximum current at the output is 13.0 Amps. The enclosure type of the device is described with the “ECD” part of the code which indicates that this AC drive is IP56 (NEMA type 4) protected. The drive output voltage is a function of output frequency which can vary from 0 to 250 Hertz. There are three ways to program the Allen-Bradley 1336-B007-ECD AC drive. You can do it from a control panel (local or remote) or with additional devices through the serial communication port. The device performs a standard control algorithm to maintain a constant torque and provides adjustable speed control with 150% overload capacity. Many parameters can be programmed to adapt this AC drive to a wide variety of applications.

The 1336-B007-ECD, like all bulletin 1336 drives, has an integrated MOV (Metal Oxide Varistor). It secures the device from voltage surge protection, phase-to-phase, and phase-to-ground short-cuts. This module has dimensions of 812.8 x 457.2 x 323.9 millimeters (32.00 x 18.00 x 12.75 inches). The permitted working ambient temperature for the drive is 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit). It can be stored at -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) temperatures.

Revision Part #Also known as
1336-B007-ECD Ser A1336-B007-ECD/A, Series A, Rev A
Don't see your particular revision? Contact us now.