The 1336-B007-ECD-FC3-L3 adjustable frequency AC drive is a microprocessor-based digital AC drive designed to provide precise and accurate control for 3-phase induction motors in most critical industrial applications. The 1336-B007-ECD-FC3-L3 AC drive belongs to the 1336 drive family which uses Pulse Width Modulation (PWM) adjustable frequency output for accurate output motor control, and this family of drives offers robust self-diagnostics upon start-up and real-time preventive maintenance for enhanced operation. The 1336-B007-ECD-FC3-L3 AC drive has an acceptable operating voltage range of 380 to 460 Volts AC with an input current rating of 13.3 Amps and a total input power rating of 10.6 kVA at 460 Volts AC. It also has an output current rating of 13 Amps, and an output voltage that is adjustable from 0 Volts to the rated input voltage (380 Volts AC, 415 Volts AC, and 460 Volts AC).

The 1336-B007-ECD-FC3-L3 AC drive and every 1336 drives are designed to support direct power connections as long as it has the correct voltage, and it comes with a built-in metal oxide varistor that offers surge voltage protection and phase and ground fault protection. The 1336-B007-ECD-FC3-L3 AC drive offers programmable acceleration and deceleration times with programmable current limit action and is designed to supply up to 150% of its full load Amps rating in constant torque applications. It has a logic interface option (-L3) that provides an interface to various drive signals and commands by using a 115 Volts AC signal, and a basic control/programming panel for complete and simplified drive configuration. The 1336-B007-ECD-FC3-L3 AC drive has a set of 90 programs for control of drive operation, and 71 of these parameters are accessible via the factory-installed programming panel (-FC3). The 1336-B007-ECD-FC3-L3 AC drive has an IP 56 (NEMA 4) enclosure and a total drive size of 32 x 18 x 12.75 inches.