1336-B007-EOD-FA2-L3

The 1336-B007-EOD-FA2-L3 drive is an adjustable frequency AC drive manufactured by Allen-Bradley/Rockwell Automation. This device is mainly used to control the speed of an electric motor by altering the input voltage frequency. This drive supports multiple input voltage ratings of 380, 415, and 460 Volts AC. The operating frequency of the drive is 50 to 60 Hertz. The frequency depends on the operating load of the drive. It is a 3-phase device that runs with an output current of 13 Amps. The 1336-B007-EOD-FA2-L3 drive uses an IP 00 rated open enclosure that makes it easy to install in different cabinet locations. This enclosure is not waterproof and the drive should be protected from water splashes. It is best suited for indoor locations. The drive is part of the 1336 series from Allen-Bradley. The drive comes with a basic control panel for its open enclosure. The KVA output for 380 Volts AC is 8.6 KVA, and it is 9.3 KVA for 415 Volts AC and 10.4 KVA for 460 Volts AC. The drive uses a 115 Volts AC logic interface board. It acts as a communication point for external manufacturing devices.

The 1336-B007-EOD-FA2-L3 drive is easy to set up and run. The drive supports multiple languages by using a language plugin module. The drive is manufactured to suit different application demands ranging from small appliances to large industrial machines. The drive can be controlled locally by using the interface module or remotely by using serial communication. The 1336-B007-EOD-FA2-L3 drive has an operating temperature range between 0 and 40 degrees Celsius with an open enclosure. Also, the operating environment should be relatively humid with a maximum humidity level of 95%, non-condensing. The 1336-B007-EOD-FA2-L3 drive uses sine-coded pulse-width modulated waveform as input. The drive supports both acceleration and deceleration programming.