1336-B007-EOD-L3

The 1336-B007-EOD-L3 is manufactured by Allen-Bradley. It is an adjustable frequency AC drive that is used for controlling 3-phase induction motors. The drive has a current output of 13 Amps and the power output of the drive is 8.6 Watts at 380 Volts AC, 9.3 Watts at 415 Volts AC, and 10.4 Watts at 460 Volts AC. The 1336-B007-EOD-L3 drive is enclosed in an IP00 open enclosure. The speed control in the drive is achieved through the PWM control where the change in the frequency controls the speed of the motor. When users receive the 1336-B007-EOD-L3 drive, they should inspect it for any visible damage and inform the supplier if they find any damage right away. If there is no damage, the users can proceed with the installation as laid out by the manufacturer in the installation manual.

It is recommended that the power to the system be switched off before performing the installation, and the users must follow the safety regulations according to the local requirements to ensure their safety and to prevent any injuries. The 1336-B007-EOD-L3 drive is sensitive to electrostatic discharge and the static electricity may damage the components on the drive board, so the users must also comply with the electrostatic discharge safety guidelines before they touch the board. The users must make the connections and wiring according to the steps outlined in the manual and they must make sure the input voltages are within the limits specified for the drive. There is a possibility of damage to the board if the input voltage is not within the specified limits or if the connections are made incorrectly. The users may contact the manufacturer support team for assistance with the installations steps or for any other part-specific information.