1336-B010-EAD-L3

The 1336-B010-EAD-L3 is an AC Drive that belongs to Allen-Bradley’s 1336 series family. This is a high-performance, AC frequency drive that is microprocessor-controlled. It is engineered to control three-phase induction motors on industrial automation applications that are critical. It can be connected to line voltages between 380 and 460 Volts AC three-phase, 50 to 60 Hertz. At the output side, this drive can produce up to 13.5 kVA, depending on the input voltage. Its special feature is a logical interface board which can exchange 115 Volts AC rated signals with other industrial automation devices. The Allen-Bradley 1336-B010-EAD-L3 produces a three-phase PWM frequency at the output. Its control is performed by using sensorless vector control or V/Hz algorithms. In this way, the power that is supplied to a motor is optimally adjusted. This drive’s output voltage is in correlation with the output frequency which is also adjustable in small steps to match the process parameters. You can set the speed of the motor by sending over 0 to 10 Volts DC analog signal to its analog input.

The Allen-Bradley 1336-B010-EAD-L3 performs fault diagnostic at power-up and checks for alarms during the work by continuously monitoring for potential conditions that may be faulty. The module’s enclosure is IP20 rated and provides basic mechanical protection for the drive and for the operator. Store this module at -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) temperatures but during operation, the drive must be kept in electrical cabinets with less than 40 degrees Celsius (104 degrees Fahrenheit) inside of it.