Product image is representative; revision or series may vary. Contact us to request a specific version.
1336-B010-EAD-S1
The Allen-Bradley/Rockwell Automation 1336-B010-EAD-S1 drive is a Bulletin 1336 adjustable frequency drive. It uses its adjustable frequency to adjust the speed and torque ratings of an industrial motor. The 1336-B010-EAD-S1 adjustable frequency drive can operate at 380, 415, or 460 Volts AC input voltage at 50 to 60 Hertz. Its enclosure’s environmental protection rating is only IP 20. The 1336-B010-EAD-S1 adjustable frequency drive has a maximum output power rating of 10 Horsepower.
-
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
-
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
-
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
-
Repairs and exchanges are available for all automation products.
- Reseller Options
Drop shipping, blind shipping, and account shipping with no extra fees.
Technical specifications for 1336-B010-EAD-S1
| Manufacturer | Allen Bradley |
|---|---|
| Product Type | Adjustable Frequency AC Drive |
| Product Line | 1336 |
| Part Number | 1336-B010-EAD-S1 |
| Weight | 34.00 lbs (15.42 kg) |
| Input Voltage | 380/415/460V AC |
| Hz | 50/60 |
| Phases | 3 |
| Amps Out | 17 |
| KVA Out @ 380V AC | 11.2 |
| KVA Out @ 415V AC | 12.2 |
| KVA Out at 460V AC | 13.5 |
| Enclosure Type | NEMA Type 1 (IP20) |
| Enclosure Amp Rating | 003, 005, 007, or 010 |
| Option | Serial Port connector |
| Product Lifecycle Status* | Discontinued/Obsolete |
* The Allen Bradley 1336-B010-EAD-S1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-B010-EAD-S1 units instead of migration.
The 1336-B010-EAD-S1 is a 3-phase controller used to drive induction motors in an industrial environment with sensitive applications. The S1 part on the 1336-B010-EAD-S1 indicates that the controller has a Serial Port Connector Cover Plate installed in the factory. The controller has an output current of 17 Amps and a minimum operating voltage of 380 Volts AC. Connections to the 1336-B010-EAD-S1 are made through a terminal block located on the lower part of the controller. Additionally, the 1336-B010-EAD-S1 provides a fault code and a programming and display. The fault code display is for displaying the 37 error codes while the programming display is mainly used when viewing and programming parameters on the 1336-B010-EAD-S1.
Some features found on the local display and programming panel are a decimal point on the extreme right to signal that the drive is in the programming mode, allowing the parameters to be changed, 4 push buttons; 1 to navigate from the operating display to the viewing display (PR), 1 to choose from viewing to programming (Enter), and the increment and decrement buttons which increase or decrease the parameter value when the drive is in the programming mode. If these 2 pushbuttons (increment and decrement) are pressed simultaneously, the programming session will be ended, taking the display to the operating display. Note that after an error has been corrected, the 1336-B010-EAD-S1 expects the input power to the drive to be cycled or the stop button pressed so that it clears the fault.
| Revision Part # | Also known as | |
|---|---|---|
| 1336-B010-EAD-S1 Ser A | 1336-B010-EAD-S1/A, Series A, Rev A | |
| Don't see your particular revision? Contact us now. | ||
- 1336-8010-EAD-S1
- 1336-B010-EAD-SI
- 1336-B01O-EAD-S1
- 1336-B0I0-EAD-S1
- 1336-BO10-EAD-S1
- 1336-BO1O-EAD-S1
- 13368010EADS1
- 1336B010EADS1
- 1336B010EADSI
- 1336B01OEADS1
- 1336B0I0EADS1
- 1336BO10EADS1
- 1336BO1OEADS1
- I336-8OIO-EAD-SI
- I336-B010-EAD-S1
- I336-B0I0-EAD-SI
- I3368OIOEADSI
- I336B010EADS1
- I336B0I0EADSI
The Allen-Bradley 1336-B010-EAD-S1 Adjustable Frequency AC Drive operates with a 380/415/460V A Input Voltage, 50/60 Hz, and 3 Phases. The 1336-B010-EAD-S1 has 17 Amps Out and a NEMA Type 1 (IP20) Enclosure Type.