The 1336-B010-ECD-FC3-L3 is an Allen-Bradley AC controller with a factory installed basic control panel for a NEMA Type 4 enclosure. This type of enclosure protects the 1336-B010-ECD-FC3-L3 against windblown dust, rain, and ice formation, and it also has pre-drilled cutouts, holes, latches, lift-off hinges, and latches. The 1336-B010-ECD-FC3-L3 also features a factory-installed logic interface board which holds the AUX input which is used in start commands. The AUX input houses a user-supplied circuit (auxiliary interlock) which can be used for logical true-state connections tied with the AUX input. The 1336-B010-ECD-FC3-L3 is capable of controlling an induction motor with a capacity of 10 Horsepower. The controller, as with other controllers in the 1336 series, supports programming through a handheld terminal which is interfaced with the 1336-B010-ECD-FC3-L3 through the serial communication port located on the drive.

A hand-held terminal provides for a way to change parameters while the drive is still operating. The maximum operating voltage for the 1336-B010-ECD-FC3-L3 is 460 Volts AC. The 1336-B010-ECD-FC3-L3 adjustable frequency drive has a rated operating temperature of 0 to 50 degrees Celsius while the storage temperature stands at between -40 and 70 degrees Celsius. The 1336-B010-ECD-FC3-L3 is UL, CE, cUL, and C-Tick certified. For basic drive control and fault display, the 1336-B010-ECD-FC3-L3 has a local display and programming panel which allows parameters to be viewed and changed. This panel is standard issue and it is factory installed. To extend the functionality of the standard display, the 1336-B010-ECD-FC3-L3 provides for the addition of a local control panel which is optional. It can be field or factory installed. The amperage rating (output) for the 1336-B010-ECD-FC3-L3 is 17.0 Amps.