1336-B010-EOD-FA2

The 1336-B010-EOD-FA2 drive is a 380 to 460 Volts AC drive manufactured by Allen-Bradley. The device is widely used in the industrial sphere for machine control needs. The total current output of the drive is 13 Amps. The drive uses a panel mounting base with an open enclosure for installing the drive in different locations. This 3-phase device is a Series A drive with a frequency of 50 to 60 Hertz. The device uses a serial communication port to communicate with other manufacturing devices. The 1336-B010-EOD-FA2 drive is equipped with a human-machine interface module to display various status and fault conditions. The information is then passed through the serial communication port by using optional devices. The drive is equipped with a fault diagnostics feature which runs during the operation time. This feature monitors the drive for potential fault conditions.

The 1336-B010-EOD-FA2 drive can be stored in a clean and dry area with an ambient temperature between -40 and 85 degrees Celsius if it will not be immediately installed. The 1336-B010-EOD-FA2 drive should not be exposed to the electrostatic discharge that is generated by the static electricity which can damage the metallic oxide semiconductor inside the drive. The drive has been designed to maintain constant torque and it has adjustable speed control with 150% overload capability. It provides an exceptional output voltage and current waveform. The 1336-B010-EOD-FA2 drive has the ability to run normally when there is a vibration of 0.152 millimeters or 1 G peak. Also, it can run with shocks of 15 G peak for up to 11 milliseconds duration. The drive supports line transients of 5000 volts peak for 320 joules. The 1336-B010-EOD-FA2 drive has a ground fault feature which can detect the drive output ground fault by sensing the unbalances in the input line current.