1336-B010-EOD-FA2-L3-S1

The Allen-Bradley 1336-B010-EOD-FA2-L3-S1 drive is used for controlling the speed and regulating the torque of induction motors. It uses control algorithms for controlling and regulating the motors. It is part of Series A of the 1336 drives from Allen-Bradley. The drive is suitable for a direct connection to the 3-phase AC power line with the correct voltage rating. The drive is equipped with different contact outputs in the main board. It includes the run contact output which is usually passive when the drive is in operation, the at-speed contact which remains passive when the drive follows the speed set by the operators and the fault contact output which displays a change of state when there is a fault in the variable frequency of the drive. The 1336-B010-EOD-FA2-L3-S1 drive can run within a voltage range of 380 to 460 Volts AC. The drive has an option for serial port connectors on the main board. The drive uses a basic control panel when it comes in an open enclosure. The open enclosure of this drive is rated with an IP 00 protection rating and it has a current rating of 003, 005, 007, or 010 Amps.

The 1336-B010-EOD-FA2-L3-S1 drive is capable of operating from an optional local or remote-control panel with minimum connections to the terminal block of the drive. If needed, external operator elements can be connected to the drive to provide additional drive control. The 1336-B010-EOD-FA2-L3-S1 drive is equipped with a drive alarm to alert the users in case of an emergency or of fault events. The drive alarm works when the drive output current is above 150% of the rated current value, the drive output current is above the MOPC limit, the bus voltage is above 110% of the nominal input voltage rating, and when the bus voltage is below 85% of the nominal input voltage rating.