1336-B010-EOD-L3

The Rockwell Automation/Allen-Bradley 1336-B010-EOD-L3 is a Bulletin 1336 adjustable frequency drive. Drives in this series are microprocessor controlled, producing a three-phase Power With Modulation (PWM) variable frequency output and supplying an adjustable motor speed. Additionally, drives in the 1336 series, including the 1336-B010-EOD-L3, ensure that the induction motor being controlled reaches the maximum performance by providing a configurable frequency which is in line with the motor parameters. The 1336-B010-EOD-L3, as with other 1336 variable frequency drives, can be programmed digitally or by using a Local or Remote Control Panel or even by using optional devices which are interfaced with the 1336-B010-EOD-L3 through the serial communication port on the drive.

The operating voltage for the 1336-B010-EOD-L3 ranges between 380 and 460 Volts AC at a frequency range of 50 and 60 Hertz and its rated enclosure type should have an IP00 international protection rating. For the factory installed options, the 1336-B010-EOD-L3 comes with a +115 Volts AC Logic Interface Board. When installing the drive, as a rule of thumb, all incoming power should be locked out to prevent injury to personnel and damage to other components/devices. The power should only be connected when all other connections have been made and verified. But when disconnecting the 1336-B010-EOD-L3, the power should be the first thing that is disconnected. Apart from disconnecting the power to the drive, the bus indicator light should be allowed to switch off, which indicates that the bus does not have any residual active power. The +DC and –DC terminals on the terminal block (TB1) should also be checked to ensure that they have zero voltage.