The 1336-B015-E0E is an adjustable frequency AC drive from the 1336 family which are manufactured by Allen-Bradley. The drive should be installed and replaced by qualified service personnel only and it is recommended to read the manual provided by the manufacturer before installing or replacing the drive. The users installing the drive should have previous experience and understanding of the electrical terminology and procedures required for replacing and troubleshooting the 1336-B015-E0E. Some parts of the drive may contain hazardous voltages and users should make sure these are not present before touching the boards. The parts inside the drive are sensitive to electrostatic discharge, which may damage the equipment. Users must follow the applicable safety guidelines to prevent any electrostatic discharge.

The 1336-B015-E0E drive has a current rating of 25 Amps and the power output of the drive is 16.5 KVA at 380 Volts AC, 18.0 KVA at 415 Volts AC, and 20 KVA at 460 Volts AC. The drive is enclosed in an open Type IP00 enclosure. There are various parts in the drive which include the bus capacitors, fan, bridge rectifier, fuses, surge suppressor, a snubber circuit, transistor module, precharge board, main control board, indicator lights, transformers, and other circuits. Users can refer to the 1336-B015-E0E drive nameplate which is located on the face of the main control board to get the drive’s catalog number and other important drive information. The drive catalog number is required when ordering the replacement parts for the drive. The drive can be operated on any one of the input voltages 380 Volts, 415 Volts, or 460 Volts AC, 3-phase, at 50/60 Hertz.