Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 1336 1336-B015-EAE

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336-B015-EAE

|

The Allen-Bradley 1336-B015-EAE drive is a basic type of adjustable frequency drive from the Bulletin 1336 product line. It does not come with any built-in control panels, serial ports, or interface boards like some of the other Bulletin 1336 drives. The 1336-B015-EAE adjustable frequency drive is rated for 380, 415, or 460 Volts AC 3-phase input voltage at 50 to 60 Hertz of frequency. It comes in an enclosure that has an IP 20 environmental protection rating and that can keep small amounts of dust and debris away from the drive’s internal components. The 1336-B015-EAE adjustable frequency drive can operate at 0 to 40 degrees Celsius and at up to 95% relative humidity without condensation.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336-B015-EAE

ManufacturerAllen Bradley
Product TypeAdjustable Frequency AC Drive
Product Line1336
Part Number1336-B015-EAE
Weight35.00 lbs (15.88 kg)
Input Voltage380/415/460V AC
Hz50/60
Phases3
Amps Out25
KVA Out at 380V AC16.5
KVA Out at 415V AC18
KVA Out at 460V AC20
Enclosure TypeNEMA Type 1 (IP20)
Enclosure Amp Rating015 or 020
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1336-B015-EAE has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336-B015-EAE units instead of migration.

The Rockwell Automation/Allen-Bradley 1336-B015-EAE is a constant torque AC drive. The drive measures 11 inches by 9 inches by 22 inches and it weighs 15.9 kilograms. The operating voltage for the 1336-B015-EAE is capped at 460 Volts AC with a frequency of 50/60 Hertz. Note that the operating voltage must be supplied by a three-phase power source. The 1336-B015-EAE has an output current of 25 Amps. The drive is supposed to be installed in a NEMA Type 1 enclosure which has an IP20 International Protection rating. The apparent output power rating for the 1336-B015-EAE is 16.5 kVA when operating at a voltage of 380 Volts AC, 18.0 kVA when operating at a voltage of 415 Volts AC, and 20.0 kVA when the operating voltage is 460 Volts AC.

The 1336-B015-EAE variable frequency drive belongs to the Allen-Bradley 1336 family of adjustable frequency drives. The 1336-B015-EAE, as with other drives with an enclosure type of Code E, has an enclosure current rating of 15 or 20 Amps. The 1336-B015-EAE allows for the interfacing of an optional local control panel which provides extra programming features such as jog, forward, reverse, start, and stop, with each having a dedicated pushbutton. However, the optional local control panel on the 1336-B015-EAE should not be considered to constitute a full operator station. Note that even when remote stop devices are used, the stop pushbutton on the local control panel remains functional. When the start pushbutton is pressed, the drive will start operating, accelerating the drive to the set speed but only if Parameter 21 is switched ON.

Revision Part #Also known as
1336-B015-EAE Ser A1336-B015-EAE/A, Series A, Rev A
Don't see your particular revision? Contact us now.