1336-B015-EAE-FA2-L3

The Allen-Bradley 1336-B015-EAE-FA2-L3 is an adjustable frequency drive, specially designed to operate with three-phase induction motors for a wide range of applications. This drive belongs to the 1336 series. The Allen-Bradley 1336-B015-EAE-FA2-L3 adjustable frequency drive is suitable to operate with a three-phase voltage of 380, 415 and 460 Volts AC, along with a frequency of 50 to 60 Hertz and a current outlet of 25 Amps. The Allen-Bradley 1336-B015-EAE-FA2-L3 adjustable frequency drive is covered with a NEMA Type 1 enclosure (equivalent to an IP20), and this enclosure is able to protect the drive from external particles that might enter the unit and impede its correct functioning, and this enclosure is also intended for indoor environments without corrosive vapors or liquids.

This enclosure allows the drive to withstand an operating temperature range from 0 to 40 degrees Celsius and a non-condensing relative humidity of 5 to 95%. The Allen-Bradley 1336-B015-EAE-FA2-L3 adjustable frequency drive has been equipped with a basic control panel and a 115 Volts AC logic interface board. Prior to the installation of the Allen-Bradley 1336-B015-EAE-FA2-L3 adjustable frequency drive, the cabinet mounting should be upright and a minimum clearance should be left for proper ventilation. The rated altitude should not exceed 1,000 meters and the atmosphere should not contain volatile or corrosive gases or vapors. Electrostatic discharge must be taken care of before the installation since it could cause serious damage. It is recommended to wear a wrist type grounding strap and to insert boards into their conductive packets once these have been removed from the drive.