The 1336-B025-EOF-L2 drive is a product of Allen-Bradley/Rockwell Automation and part of the 1336 series of adjustable frequency AC drives. It operates with a frequency range of 50 to 60 Hertz with 3 phases. This drive features 41 Amps of output current and it has an open IP 00 enclosure. It also comes with a Logic interface board rated at 24 Volts DC. The Allen-Bradley 1336-B025-EOF-L2 AC drive is uniquely designed to run on various 3-phase input voltages. It comes with a “B” drive rating code which means the drive can conveniently run on the three-phase voltages, which are 380 Volts AC with an output of 27 kVA, 415 Volts AC with an output of 29 kVA, and 460 Volts AC with an output of 33 kVA. The Allen-Bradley 1336-B025-EOF-L2 variable frequency drive has an open enclosure, and it also features an enclosure for protection. There is no need to reconnect the Fan Transformer T1 to this drive.

The 1336-B025-EOF-L2 drive has a programming panel that enhances the clear viewing of its parameters and it also enables easy programming. It is essential to note that most of these programming tasks can be executed without turning off the drive. Nevertheless, the operators should not make any adjustments to the drive’s parameters while the AC drive is in operation. Before installing, servicing, or replacing any component of the 1336-B025-EOF-L2 AC drive, ensure it is disconnected from the source of power. Do not forget that even after the power is switched off, an electric shock might still happen because some components may still have dangerous voltages. Therefore, it is recommended that the users ensure that the voltage levels in the terminal blocks known as TB1 and TB3 are at zero before disassembling the drive.